Korg NAUTILUS Series, Руководство по параметрам, Страница: 496 / 961

SEQUENCER mode
486
If the Status (0–1b) of each track is INT, you can use the
“Track On/Off Ctrl” setting to stop the oscillator of each
track from sounding.
If you set “OSC On/Off Ctrl” to by Off or by On settings
and operate the ARP ON/OFF button while real-time-
recording a song, you must be aware of the following
points.
• In order to control this parameter during playback,
operations of the ARP ON/OFF button must be recorded
in real-time.
• Set “ARP ON/OFF” (GLOBAL 2–1b) to MIDI CC#14.
If this is assigned to MIDI CC#14, operations of the
ARP ON/OFF button can be recorded in real-time. (See
“2–1b: MIDI CC# Assign - Controllers” on page 655)
• Operations will also be recorded if you assign this key to
MIDI CC#00–95, but in order to avoid confusion when
receiving another CC#, you should use CC#14.
• “ARP ON/OFF” (GLOBAL 2–1b) will also be set to
MIDI CC#14 if you execute the page menu command
“Reset Controller MIDI Assign” with “To:” set to
Default Setting. After executing, turn the assignment Off
for other MIDI CC# Assign –ARP Controllers that you
do not need to record.
Track 02…16 (Track Number)
These are the wave sequence and Arpeggiator-related
settings for MIDI tracks 2 through 16. They are the same as
for track 1. See “Track 01”:.
v 2–5: Page Menu Commands
• Compare → p.112
• Memory Status → p.521
• Exclusive Solo → p.113
• Rename Song → p.521
• Initialize Song → p.522
• Copy From Song → p.522
• Load Template Song → p.522
• Save Template Song → p.523
• FF/REW Speed → p.523
• Set Location (for Locate Key) → p.523
• GM Initialize → p.523
• Copy from Combi → p.525
• Copy From Program → p.525
• PAGE → p.126
• MODE → p.126