Korg NAUTILUS Series Скачать руководство пользователя страница 15

Страница: 15 / 961

PROGRAM > Home Program Select menu

Program Select menu

Category/Program Select menu

1. Press the Program Select Popup button, then press the

Category button to open the Category/Program Select
menu.

2. Press one of the tabs on the left or right to select the

desired category.

If no Programs are assigned to a particular category or sub-
category, you won’t be able to select its tab.

3. Press a tab in the top to select a sub-category.

This displays Programs categorized by sub-categories. The
tabs will be disabled for sub-categories to which Programs
have not been assigned.

All:

All programs in the category will be shown. Choose this

when you don’t need to use sub-categories.

0…7:

The programs will be shown by sub-category.

4. Select a program from the list.

You can touch a Program’s name directly, or use the + and -
buttons or VALUE dial.

If there are more Programs than can be shown on the screen
at one time, use the scroll bar to browse through the entire
Category.

5. The Favorite check-box trims the list to show only

Programs you’ve marked as favorites.

If the selected Category contains no Programs marked as
Favorites, the box can’t be checked.

6. You can use the Find button to search for Programs

by name.

For more information, see “Find dialog” on page 7.

7. Press the OK button to confirm your choice, or press

the Cancel button to exit without changing the
Program.

Note:

You can assign a category to a Program in the “Write

Program” dialog.

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NAUTILUS Series

Отзывы:

Korg NAUTILUS Series, Руководство по параметрам, Страница: 15 / 961

Результаты поиска

Содержание NAUTILUS Series

Отзывы: