manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 737 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 737

MEDIA: Page Menu Commands    Install EXs

727

5. Go to the MEDIA– Utility page.
6. Using the Drive Select menu at the bottom of the page, 

select the USB storage device.

You may need to wait a few seconds after connecting the 
device before it is recognized.

7. Open the folder containing the EXs data from step 2.
8. Select the file whose name ends in .exsins.

The “exsins” suffix stands for “EXS INStaller.” For instance, 
an installer file might be named “EXs10.exsins.”

When a .exsins file is selected, the 

Load

 button changes to 

read 

Install

. Only one EXs can be installed at a time. If 

Multiple Select

 is 

On

, 

Install

 will be disabled.

9. Select Install EXs from the menu, or press the Install 

button.

The system will check to confirm that the installation files 
are valid, and that there is sufficient space on the SSD to 
install the EXs. Next, a dialog box will appear:

Found installer for: [EXs name]
Space required: [nnn] MB
SSD1: [drive name] [nnn] GB available

10.Press Install to continue with the installation, or press 

Cancel to stop without installing.

An “are you sure?” message will appear to confirm the 
installation.

11.Press OK to continue with the installation, or press 

Cancel to stop without installing.

The installation will then begin. This may take a while; a 
progress bar shows the installation as it proceeds. Next, the 
newly installed files will be verified. 

After the verification has completed successfully, the 
progress bar will disappear, and the installation is complete. 
The EXs sample data itself is installed on an invisible, 
protected part of the drive. To use the EXs, you’ll load its 
associated files (.KSC, .PCG etc.); for the location of these 
files, see the documentation of the specific EXs.

Using the newly installed EXs

To use the new EXs:

1. Load the newly installed .PCG and .KSC files.

Make sure to back up any sounds before over-writing them 
in memory. You may need to free up sample RAM, or use 
the “Clear” option when loading the .KSC. You can also load 
specific sounds from the .KSC, make your own sub-sets of 
its sounds, and automatically load the new samples at 
startup. For more information, see:

GLOBAL “0–3: KSC Auto-Load” on page 640

GLOBAL “0–4: Sample Manage” on page 643

MEDIA mode menu command “Load .PCG” on page 703

MEDIA mode menu command “Load .KSC” on page 712

Authorization

If an authorization code is required, the EXs will work in 
demo mode, fading in and out, until the code is purchased 
and entered into the NAUTILUS. For more information, see 
“GLOBAL > Options Info” on page 682.

Error messages

When installing, error messages may be displayed to 
indicate problems, as described below.

“Error: invalid option file” means that the installation data is 
corrupted. Copy the file to the USB media again, or if that 
fails, download the data again.

“Error: not enough disk space for the installation” means 
that the internal SSD is too full. Remove data from the SSD, 
backing it up to USB media, in order to free up space. 

Uninstalling EXs

Optional EXs may be uninstalled to reclaim space on the 
internal drive(s). For more information, see “Uninstall EXs” 
on page 692.

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов