Korg NAUTILUS Series, Руководство по параметрам, Страница: 388 / 961

COMBINATION mode
378
040.00…300.00 allow you to set a specific tempo in BPM,
with 1/100 BPM accuracy. In addition to using each VALUE
controller, or by playing a few quarter-notes on the TAP
button. To set values below the decimal point, hold down the
ENTER button and input the value with the VALUE
controller.
EXT means that the tempo will sync to external MIDI
clocks. You’ll see this if the Global MIDI page MIDI Clock
parameter is set to External MIDI or USB , or if it’s set to
Auto MIDI or Auto USB and the NAUTILUS is currently
receiving MIDI clocks. For more information, please see
“MIDI Clock (MIDI Clock Source)” on page 651.
0–1b: Status Play/Mute
Selected Timbre Info
This area shows information on the timbre selected for
editing. Timbre number/program bank/number/name.
Gray color and [Inactive] warning in Timbre Info
If the background is gray, instead, this means that the
maximum amount of EXi Fixed Resources has been
exceeded, and the EXi Program assigned to the Timbre
will be muted and inactive.
For more information on this subject, including ways to
get more out of the system, see “CX-3 & other EXi:
Limitations on EXi fixed resources” on page 380.
“Samples Not Loaded” message
If the Timbre’s Program uses one or more EXs
Multisamples, Samples, or Drum Samples which are not
currently loaded, it will not sound correctly. As an
indication of this, the message “Samples Not Loaded”
will appear at the top of the display. To fix this, load the
required EXs sample data.
Timbre 01 (Timbre Number)
This indicates the timbre number. Below each timbre
number are shown various parameters which you can edit for
that timbre.
Category
When the timbre status is “INT”, the Program category used
by the timbre is displayed. The background color also differs
for each Program category.
The timbre status displays as “Ext” for “EXT”, and “Ex2”
for EX2. The background color will change to dark gray.
Program Select [0…127 (INT and USER Banks),
1…128 (GM Banks)]
Here you can select the program used by each timbre. The
lower line displays part of the program name.
To switch the program of a timbre
• Choose Program Select and turn the VALUE dial or use
the +/ − buttons.
• From the Bank/Program Select menu you can view and
select programs by bank.
• From the Category/Program Select menu you can view
and select programs by category.
• In the Bank/Combination Select menu or
Category/Program Select menu, you can use the Favorite
function to view and select programs whose “Favorite”
setting is check.
• You can transmit MIDI program changes from a
connected external MIDI device.
When you select a Combination on the NAUTILUS, a
MIDI program change for the selected combination
number will be transmitted on the global
MIDI Channel
(GLOBAL 1–1a). At the same time, bank select, program
change, and volume (CC#7) messages will be transmitted
on the MIDI channel specified for each timbre whose
Status (0–1b, 2–1a) is set to EXT or EX2. However,
these messages will not be transmitted for timbres that are
set to the same MIDI channel as the global MIDI channel.
In this case, EX2 timbres will show the “Program” Bank
as “–”, and will transmit the bank number that was
specified in “Bank Select” (2–1a).
When you play on the NAUTILUS keyboard and
controllers, MIDI messages are transmitted on the global
MIDI channel . At the same time, timbres whose Status
is set to EXT or EX2 will transmit the same messages on
their own MIDI channel.
If bank select and program change messages are received
on a MIDI channel that matches the MIDI channel of a
timbre whose
Status is INT, the program of that timbre
will change. However if the MIDI channel of the
incoming message matches the global MIDI channel
“MIDI Channel,” then the combination will change.
If you do not want the combination to change, you can
either change the global MIDI channel so that it does not
match the channel on which the program change
messages are being received, or you can uncheck
“Combination Change” (GLOBAL 1–1c). You can also
uncheck “Bank Change” so that only the program number
will change and the bank will remain the same.
If you wish to change the program assigned to certain
timbres without changing the combination, you can also
set
Enable Program Change (3–1a) so that the program
will change on certain timbres but not on others.
Selected Timbre Info
Timbre No. +Category
Program Select
Status
Mute
Solo
Pan
Volume
Timbre 01