Korg NAUTILUS Series Скачать руководство пользователя страница 188 | Manualshive

Страница: 188 / 961

Korg NAUTILUS Series Скачать руководство пользователя страница 188

EXi: AL-1 Analog Synthesizer

178

Intensity Mod AMS

[List of AMS Sources]

This selects a secondary AMS modulation source to scale
the intensity of AMS1.

For a list of AMS sources, see “Alternate Modulation Source
(AMS) List” on page 901.

Intensity

[–99…+99]

This controls the depth and direction of the Intensity Mod
AMS. Even if the main AMS1 Intensity is set to 0, Intensity
Mod AMS can still control the final amount of AMS A over
the full +/-99 range.

For example, if

AMS1

is set to the

Pitch EG

, and

Intensity

Mod AMS

is set to

JS+Y

, positive settings mean that

pushing the joystick away from yourself will increase the
intensity of the Pitch EG modulation of LFO Frequency.

AMS2

[List of AMS Sources]

This selects the second modulation source for the LFO
frequency. For a list of AMS sources, see “Alternate
Modulation Source (AMS) List” on page 901.

Intensity

[–99…+99]

This controls the amount of modulation from AMS2.

8–2c: Frequency MIDI/Tempo Sync

MIDI/Tempo Sync

[Off, On]

On (checked):

The LFO will synchronize to the system

tempo, as set by either the Tempo knob or MIDI Clock. The
LFO speed will be controlled by the

Base Note

and

Multiply

parameters, below. All settings for

Frequency

and

Frequency Modulation

will be ignored.

Off (unchecked):

The Frequency settings will determine the

speed of the LFO, and the tempo settings will have no effect.

Base Note

[

…

]

This sets the basic speed of the LFO, relative to the system
tempo. The values range from a 32nd note to a whole note,
including triplets.

Times (Sync. Times)

[01…32]

This multiplies the length of the Base Note. For instance, if
the Base Note is set to a sixteenth note, and Times is set to 3,
the LFO will cycle over a dotted eighth note.

v

8–2: Page Menu Commands

• Write Program

• Exclusive Solo

• PAGE

• MODE

8–3: LFO 2

8–4: LFO 3

8–5: LFO 4

The settings for LFOs 2-4 are identical to those for LFO1.
For more information, see “8–2: LFO 1” on page 175.

«
...
186
187
188
189
190
...
»

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов