manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 911 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 911

Alternate Modulation Sources (AMS)    Alternate Modulation Source (AMS) List

901

Alternate Modulation Source (AMS) List

Physical and MIDI controllers

Off

This means that no modulation source is selected.

Note Number

This is the note’s MIDI note number, from 0 (C-2) to 127 
(G9).

Velocity

This is the note’s MIDI note-on velocity. 

Exponential Velocity

This is MIDI note-on velocity through an exponential curve. 
The curve means that low velocities won’t have very much 
effect, and the difference between two lower velocity values 
won’t be very noticeable. 

On the other hand, high velocities produce increasingly 
greater effects, and the difference between any two higher 
velocity values will be more pronounced.

Poly After Touch

Polyphonic aftertouch allows a different aftertouch value for 
each note. This can be received from external MIDI devices 
or generated by the internal sequencer. The NAUTILUS 
keyboard itself does not generate poly aftertouch, however.

After Touch

This receives MIDI Aftertouch, as well as aftertouch 
generated by pressing down on the NAUTILUS keyboard.

JS X

This is the horizontal movement of the main joystick. It also 
receives MIDI Pitchbend.

JS+Y (CC#01)

This is the vertical movement of the main joystick, upwards 
from the center. It also receives MIDI CC#01 (mod wheel).

JS–Y (CC#02)

This is the vertical movement of the main joystick, 
downwards from the center. It also receives MIDI CC#02 
(breath controller).

JS +Y & AT/2 (Joy Stick +Y & After Touch/2)

The effect will be controlled by the joY (Vertical 
upward) and by after touch. In this case, the effect of after 
touch will be only half of the specified intensity.

JS –Y & AT/2 (Joy Stick –Y & After Touch/2)

The effect will be controlled by the joystick –Y (Vertical 
downward) and by after touch. In this case, the effect of after 
touch will be only half of the specified intensity.

Foot Pedal (CC#04)

This AMS source receives MIDI CC#04. It can also be 
generated by a foot pedal connected to the rear-panel 
ASSIGNABLE PEDAL input, if the Global 

Foot Pedal 

Assign

 parameter is set to Foot Pedal (CC#04). For more 

information, see “Foot Pedal Assignments” on page 917.

Value Slider

 (CC#18)

You can use the value slider as a modulation source, but only 
when the following are true:

• You’re on the PROGRAM > Home page, and the big 

Program name is selected, or

• You’re on the COMBINATION > Home– Prog 

Select/Mixer page, and the big Combination name is 
selected.

In these cases only, the value slider sends MIDI CC#18, and 
can be used as a modulation source.

Control change 17 (CC#17)

This AMS source always responds to MIDI CC#17. A MIDI 
value of 0 (far left) causes the maximum negative 
modulation; 64 (center) means no modulation; and 127 (far 
right) causes the maximum positive modulation. (You can 
invert this response, if desired, by using a negative AMS 
intensity.)

It also usually corresponds to 

Knob 5 (USER 1)

 on the 

Control surface

- but this depends on the Modulation Knob 

Assign settings for each individual Program, Combi, and 
Song. 

Basically, there are two separate things: a physical knob 
named 

Knob 5

, and an AMS source named named “Control 

change 17 (CC#17).” This provides a great deal of 
flexibility–but’s it’s also easy to link the two together. To do 
so:

1. Go to the current mode’s Controllers page.
2. Set 

Knob 5

’s Modulation Knob Assign to 

Control 

change 17 (CC#17)

.

For more information, see “1–8: Controllers” on page 48, 
and “RT Control Knobs 1–6 Assignments” on page 914.

Control change 19 (CC#19)

This AMS source always responds to MIDI CC#19, and will 
usually also correspond to 

Knob 6 (USER 2)

. For more 

information, see “Control change 17 (CC#17)” on page 901.

Knob Mod.5 (CC#20)

This AMS source always responds to MIDI CC#20, and will 
usually also correspond to 

Knob 7 (USER 3)

. For more 

information, see “Control change 17 (CC#17)” on page 901.

Knob Mod.6 (CC#21)

This AMS source always responds to MIDI CC#21, and will 
usually also correspond to 

Knob 8(USER 4)

. For more 

information, see “Control change 17 (CC#17)” on page 901.

-99

+99

0

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов