Korg NAUTILUS Series, Руководство по параметрам, Страница: 29 / 961

PROGRAM > Home 0–6: ARP DRUM
19
P2: ALT1
P3: ALT2
P4: RANDOM
Loop/1Shot
This sets whether to make the arpeggio pattern repeat itself,
or whether the pattern should play to the end and stop.
Loop : The arpeggio pattern will repeat while you are
playing the keyboard or while Latch is enabled.
1Shot : The arpeggio pattern will play to the end and then
stop, even while you are still playing the keyboard or while
Latch is enabled.
Latch
Selects whether the Latch function is enabled for each
arpeggiator.
Note: The latch will not operate while the Latch function
itself is turned off, even if the latch settings in each
arpeggiator are enabled.
Drum Track/StepSeq select
Selects the drums used by the scene, from the drum track or
step sequencer A–D.
Drum Track Pattern
Selects the drum pattern.
You can write to patterns U000–U999. Patterns that you
create in SEQUENCER mode can be converted into user
drum patterns. See “Convert to Drum Track Pattern” on
page 553 and the “Creating Drum Track patterns” on
page 167 of the OG
for how to create a user drum pattern.
More
Open the Scene 1–4 Setup detailed settings dialog box.
Sort [Off, On]
This expands all of the notes (keys) that are played together
into an arpeggio, and sets the order in which they sound.
On (checked): The arpeggio is played in order of scale
tones, regardless of the order in which the note-on signals
were played.
Off (unchecked): The arpeggio is played in the order in
which the note-on signals occurred.
Key Sync. [Off, On]
This sets whether the arpeggio plays at the timing with
which you play the keyboard, or whether the arpeggio
always follows the “Tempo” setting.
On (checked): The arpeggiator will start playing from the
beginning, starting with the first note-on that occurs after
you’ve taken your hands completely off the keyboard. This
works best when you are playing in real time, to match the
timing of when the measure starts.
Off (unchecked): The arpeggiator will always follow the
“Tempo” setting.
Arpeggio Pattern Preview
This shows the steps of the user arpeggio patterns as an
image.
Octave [1, 2, 3, 4]
Specifies the range (in octaves) over which the arpeggiator
notes sound.
When a user arpeggio pattern is selected, the way that the
notes are distributed changes according to the “Octave
Motion” settings.
Resolution [
3
… ]
This sets the resolution of the arpeggio.
The notes that the arpeggiator plays will be based around the
value you set here. The speed of the arpeggio pattern is
determined by the “Tempo” and “Resolution” settings.
Swing [–100...+100(%)]
Shifts the timing of the even-numbered arpeggiated notes,
starting from the first note.
Velocity [001...127, Key, Step]
Specifies the velocity of the notes in the arpeggio.
001–127: Each note will sound with the specified velocity
value.
ALT1
ALT2
RANDOM