manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 394 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 394

COMBINATION mode

384

Quick Layer

Overview

This dialog box is reached by pressing the Quick Layer 
button on the COMBINATION > Home page.

A “layer” is when playing a single note causes two or more 
sounds to be heard simultaneously. When invoked from 
COMBINATION mode, the Quick Layer function lets you 
layer a Program with the selected Combination.

All of the Quick Layer controls are non-destructive and 
reflected immediately when playing on the keyboard. You 
can experiment with different settings, and fine-tune until 
you find the perfect sound. Once you’re happy with the 
results, you can save the layer as a new Combination.

Limitations of Quick Layer/Split in 
COMBINATION mode

In PROGRAM mode, Quick Layer and Quick Split always 
create a Combination with three Timbres (Main, Layer/Split, 
and Drum Track), and the use of ARP is limited to two 
modules, A and B. This means that there will always be a 
sufficient number of Timbres and 

ARP modules

 to preserve 

the original sounds.

When using Quick Layer/Split in COMBINATION mode, 
however, these resources may be more limited. This 
normally won’t be an issue, but in some cases the sound of 
the Main Combination may change. Additionally, the sound 
of the Layer or Split Program may change due to effects 
usage, and subtle aspects of keyboard 

Slopes

 in the Main 

Combination may change. These factors are described in 
detail below.

Timbres

The Split or Layer Program is automatically placed in an 
unused Timbre. If there are additional unused Timbres, they 
will be muted. If all Timbres are already in use by the Main 
Combination, the selected Program is put into Timbre 16, 

replacing whatever was there previously. If this occurs, a 
caution icon will appear (see “Caution messages,” below), 
and the Main Combination may not sound exactly the same.

Effects

As long as there are enough insert effect (IFX) slots, the 
selected Program’s insert effects (IFX) are copied into the 
Combination, and the Program is routed to them. If there are 
not enough available IFX slots, the Program’s effects won’t 
be copied, and a caution icon will appear (see “Caution 
messages,” below).

The Combination will continue to use its previously 
assigned Master and Total Effects (MFX and TFX). The 
Send 1/2 levels of the Layer Program are copied into the 
Timbre, but the MFX and TFX themselves are not. This 
means that the layer Program may not sound exactly the 
same as it would in PROGRAM mode.

Split Point and keyboard slopes

Combinations support keyboard slopes, in which sounds 
gradually fade in or out over a range of notes.

If the 

Split Point

 overlaps with existing keyboard slopes 

within the Main Combination, the affected Timbres’ 

Top 

Slope

 and 

Bottom Slope

 values are adjusted to optimal 

values as much as possible.

Split Point and ARP - Timbre Zone Bypass

If the Main Combination’s 

Use ARP

 check-box is enabled, 

Quick Split attempts to maintain the original ARP’s effect 
over the Split Point. The affected 

ARP Modules

’ Timbre 

Zone Bypass parameters are set to optimal values as much as 
possible; however, the main Combination may not sound 
exactly the same as it did originally.

Caution messages

If there are insufficient free IFX slots, Arpeggiators, and/or 
Timbres to completely merge the two sounds, an 
exclamation point icon will appear:

Bank
(Bank/Combination Select)

Bank
(Bank/Program Select)

Combination Select  (Main)

Octave (Layer)

Program Select (Layer)

Tempo

Category image

Category image

KEYBOARD 
Graphic

Write Layered
Combi

Octave (Main)

Solo (Main)

Select ARP/DRUM

Zone (Layer)

Solo (Layer)

Volume
(Main)

Volume
(Layer)

Volume

Keyboard Zones

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов