manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 382 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 382

EXi: EP-1 MDS Electric Piano

372

Wet/Dry 

[Dry, 1: 99…99:1, Wet]

Sets the balance between the “wet” processed sound and the 
dry input. The default is 

Wet

.

Note: 

When 

Mode

 is set to 

Chorus

, the Intensity control is 

the same as 

Wet/Dry

.

Source

[List of Dmod Sources]

Selects a modulation source for 

Wet/Dry

.

Amount

[–100…+100]

Sets the modulation amount for Wet/Dry.

EP Chorus

This is inspired by a rare chorus built into an early version of 
a famous modified tine piano.

Speed [Hz]

[0.10…10.00]

This controls the speed of the chorus’ LFO. The default is 
1.96 Hz.

Source

[List of Dmod Sources]

This selects a modulation source to control the 

Speed

. For a 

list of Dmod sources, see the “Dynamic Modulation Source 
List” on page 910.

Amount

[–10.0…+10.0]

This controls the depth and direction of the 

Speed 

modulation.

Depth [0…100]

This sets the depth of LFO modulation. The default is 55.

Source

[List of Dmod Sources]

This selects a modulation source to control the 

Depth

.

Amount

[–100…+100]

This controls the depth and direction of the 

Depth 

modulation.

OUTPUT

This is the standard effects output section, with modulatable 
control over wet/dry balance. For more information, see 
“OUTPUT” on page 370.

Vintage Flanger

A model of a truly classic analogue flanger. This amazing 
stompbox’s bucket-brigade technology provides a sweeping, 
whooshing sound, perfect for chords.

Speed [Hz]

[0.10…10.00]

This controls the speed of the LFO. The default is 0.14Hz.

Source

[List of Dmod Sources]

This selects a modulation source to control the 

Speed

. For a 

list of Dmod sources, see the “Dynamic Modulation Source 
List” on page 910.

Amount

[–10.0…+10.0]

This controls the depth and direction of the 

Speed 

modulation.

Depth [0…100]

Sets the depth of LFO modulation. The default is 71.

Source

[List of Dmod Sources]

This selects a modulation source to control the 

Depth

.

Amount

[–100…+100]

This controls the depth and direction of the 

Depth 

modulation.

Resonance

[0…100]

This controls the intensity of the flanger effect, via feedback. 
The default is 35.

Manual

[1…100]

This adjusts the offset of the LFO sweep, effectively 
increasing the center delay time of the chorus. The default is 
35.

When 

Depth

 is set to the maximum of 

100

, this has no 

effect.

Source

[List of Dmod Sources]

This selects a modulation source to control the 

Manual

 

amount.

Amount

[–100…+100]

This controls the depth and direction of the 

Manual 

modulation.

LFO Reset Source

[List of Dmod Sources]

This selects a modulation source to reset the LFO. You can 
use this to re-start the flanger’s jet-like, rolling motion just 
before a big power chord, for instance. This will be most 
useful when the 

Speed

 is set relatively low.

Reset Offset Amount

[0…100]

This controls the phase of the LFO when reset.

OUTPUT

This is the standard effects output section, with modulatable 
control over wet/dry balance. For more information, see 
“OUTPUT” on page 370.

Red Compressor

Need to play clean chordal passages with smooth, even 
dynamics? Then, look no further: this compressor is 
modeled on a pedal whose clean sound made it hugely 
popular. Perfect for pop and funk music.

Sensitivity

[1…100]

This controls the amount of compression. Increasing the 
value boosts lower level sounds, and raises the overall 
volume. The default is 50.

To adjust the final volume, use the 

Output Level

 parameter.

Attack

[1…100]

This controls the onset time of the compressor. The default is 
25.

Level

[0…100]

Compression reduces the overall gain of the signal. This 
allows you to compensate for that effect, by boosting the 
gain again at the output. The default is 50.

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов