Korg NAUTILUS Series Скачать руководство пользователя страница 378

Страница: 378 / 961

EXi: EP-1 MDS Electric Piano

368

Intensity

[–10.0…+10.0]

This controls the depth and direction of the

Intensity

AMS

modulation.

5–1h: Amp & Cabinet

ON/OFF

[On, Off]

This enables the amp and cabinet modeling.

AMS

[List of AMS Sources]

This selects an AMS source to turn the amp and cabinet
model on or off. For a list of AMS sources, see “Alternate
Modulation Source (AMS) List” on page 901.

AMS Mode

[Toggle, Momentary]

This controls the way in which the amp and cabinet

Enable

AMS works. For more information, please see “AMS Mode”
on page 367.

DRIVE

[00.0…10.0]

This controls the amount of overdrive and distortion in the
amp. At lower settings, the amp is very clean; as you
increase the

DRIVE

, it gets dirtier and more distorted. The

output level is compensated, so increasing

DRIVE

causes

only a moderate increase in perceived volume.

AMS

[List of AMS Sources]

This selects an AMS source to control the

DRIVE

. For a list

of AMS sources, see “Alternate Modulation Source (AMS)
List” on page 901.

Intensity

[–10.0…+10.0]

This controls the depth and direction of the

DRIVE

AMS

modulation.

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NAUTILUS Series

Отзывы:

Korg NAUTILUS Series, Руководство по параметрам, Страница: 378 / 961

Результаты поиска

Содержание NAUTILUS Series

Отзывы: