manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 398 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 398

COMBINATION mode

388

LOWER or UPPER PROG

Lower Program (Upper Program)

Select the programs to add to the lower or upper side.

Use the “Bank/Program Select” and “Category/Program 
Select” to search for banks, categories and keywords.

Note: 

This automatically searches for timbres not used by 

the main Combination to set the lower (upper) Programs. 
Note that if the main Combination does not use all 16 
timbres, timbre 16 is set as the lower (upper) Program. For 
this reason, the main Combination will not sound exactly the 
same.

Note: 

Selecting the lower (upper) Program will 

automatically copy the lower (upper) Program’s insert 
effects. In the same way, the “Send1” and “Send2” values 
will be copied to the master effect. However, the values will 
not be copied if there are not enough insert effects available.

Note: 

For the master and total effects, the main Combination 

settings are copied. Because of this, the lower (upper) 
Program will not sound the same in PROGRAM mode.

The message “>Caution” is shown if there are not enough 
insert effect slots or Combination timbres. Touch this to 
open the Quick Layer/Split Caution message, and check 
which items are insufficient. For more information, see 
“Caution messages” on page 384.

Solo

[On, Off]

This turns the Solo function on/off. If Solo is enabled, only 
tracks with Solo On will sound; other tracks will be muted.

The setting will alternate on/off each time you press the Solo 
button.

Category image

This display-only graphic represents the category or sub-
category of the Split Program.

Octave

[-2, -1, 0, +1, +2]

This adjusts the pitch of the Split Program in 1-octave units.

Internally, the 

Octave

 setting controls the Timbre’s 

Transpose

 parameter. 

Volume

[000...127]

This adjusts the volume of the Split Program, directly 
controlling the Timbre’s volume slider. The default setting is 
127.

MAIN COMBI

(Combination select)

[List of Combinations]

By default, this will be the currently selected Combination. 
You can also select a different Combination, if desired. You 
can use all of the normal Combination selection methods, 
including bank and number, category, and Find.

Solo

[On, Off]

This turns the Solo function on/off. If Solo is enabled, only 
tracks with Solo On will sound; other tracks will be muted.

The setting will alternate on/off each time you press the Solo 
button.

Category image

This display-only graphic represents the category or sub-
category of the Main Combination.

Octave

[-2, -1, 0, +1, +2]

This sets the pitch of the Main Combination in 1-octave 
units.

Internally, this edits all of the individual Timbre 

Transpose

 

parameters.

Volume

[-127...000...+127]

This adjusts the overall volume of the original Combination 
while maintaining the balance between individual Timbres. 
Internally, it does so by controlling the Timbre Volume 
sliders. In order to maintain the original balance, the editing 
range when increasing volume is automatically restricted; 
once any of the Timbres reaches its maximum volume 
setting, the overall volume will not rise any further.

Since this is a relative adjustment, the parameter will always 
start at the default of 000 (no change).

+001...-127 lowers the volume, and +001...+127 raises the 
volume.

Note: 

The values from 0 to +127 will raise the volume until 

one of the timbre volumes reaches its maximum. When one 
of the timbres reaches its maximum volume, the volume will 
not go up any more.

Note: 

The volume can be set for each timbre in a 

Combination. This parameter is used to adjust the overall 
volume while maintaining the volume balance between 
timbres. For this reason, the value will be reset to “+000” 
each time you open the Quick Layer dialog box.

ARP/DRUM

Select ARP/DRUM

This selects whether to use the ARP/DRUM settings from 
the main Combination or from the lower (upper) Program.

When the “Main” button is turned on, the ARP/DRUM 
settings of the main Combination will be copied.

When the “Lower (Upper)” button is turned on, the 
ARP/DRUM settings of the lower (upper) Program will be 
copied.

By default, the ARP/DRUM settings of the main 
Combination will be copied. When the ARP and DRUM 
buttons are turned on, notes can be played using the 
arpeggiator, drum track or step sequencer.

Note: 

You cannot play the arpeggiator, drum track or step 

sequencers of both the main Combination and the lower 
(upper) Program at the same time.

The message “>Caution” is shown if there are not enough 
insert effect slots or Combination timbres. Touch this to 
open the Quick Layer/Split Caution message, and check 
which items are insufficient. For more information, see 
“Caution messages” on page 384.

Volume

[-127...000...+127]

This adjusts the volume of the ARP/DRUM. Since this is a 
relative adjustment, the parameter will always start at the 
default of 000, which maintains the Drum Track’s original 
volume. 

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов