Korg NAUTILUS Series Скачать руководство пользователя страница 573 | Manualshive

Страница: 573 / 961

Korg NAUTILUS Series Скачать руководство пользователя страница 573

SET LIST > Home 0–1: Play

563

0–1e: GRAPHIC EQ

The graphic at the bottom of the page shows the frequency
curve created by the Set List EQ, along with whether or not
the EQ is bypassed. Touch the graphic to jump directly to the
Set List GRAPHIC EQ dialog.

0–1f: MIXER

The mixer is used to adjust the balance between sounds of
the Set List Slot in use.

Volume

When the sound of the selected slot is a Program

The OSC (EXi) of the selected Program, the drum track
balance and audio input settings are shown.

The mixer is used to adjust the balance between sounds of
the Set List Slot in use.

EQ/Send/Mute/Solo

Program

EQ:

Displays the OSC (EXi) and drum track EQ. Press this

to display a larger screen for making adjustments.

Note:

The EQ shown in OSC (EXi) is a 3-band EQ for the

Program, and has the same parameters as 1 and 2 (EXi1,2).
You can adjust the 3-band EQ that is exclusively used by the
drum track.

Note:

There is no EQ for the audio input.

Send:

Adjusts the send levels for the OSC (EXi), drum track

and audio input. When using an IFX such as OSC (EXi) for
the Program, this adjusts the send level for the IFX.

Mute, Solo:

Controls the mute and solo status for the OSC

(EXi), drum track and audio input.

Audio Input

Adjusts the audio input.

When the sound of the selected slot is a
Combination or Song

This is basically the same as the Mixer features in
COMBINATION > Home and in SEQUENCER > Home.

Use the Edit Combination (Song) command (

→

PMC) when

changing the Timbre (Track) Program inside of a set list.

EQ:

This lets you view and adjust the timbre (track) EQ.

0–1g: ARP/DRUM

This turns the arpeggiator and/or drum track/step sequence
for the selected Program or Combination on and off.

This works the same as the ARP DRUM page for each
mode.

For more information, see “ARP DRUM page” p.15, p.390,
p.460.

Note:

You cannot change the scene settings from this page.

«
...
571
572
573
574
575
...
»

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов