Korg NAUTILUS Series, Руководство по параметрам, Страница: 481 / 961

SEQUENCER > EQ/X-Y/Controllers 1–5: X-Y Volume
471
1–5b: X-Y Graphic
X-Y Graphic
This shows a diagram of the vector space, including the five
points of the X-Y Envelope (labeled 0–4).
The transitions between the X-Y Envelope’s points are shown
by black lines, and the loop transition is shown by a gray line.
Show Volume Image [Off, On]
The X-Y graphic includes an image representing the X-Y
Volume Control settings for the current Track (see
Track
Select , below). You can use the Show Volume Image check-
box to toggle this part of the graphic on and off.
Track Select [01…16]
This selects the Track whose volume image will be shown.
Show Point [X-Y Control,
X-Y Envelope Point 0…4]
You can view the volume and CC values for any of the EG’s
five points. This selects the point whose values will be shown.
Track Volume & CC Display
This read-only display shows the volume and CC values for
the current X-Y point, as selected by the Show Point
parameter, above.
Track 01
X-Y Assign [Off, +X, –X, +Y, –Y]
This assigns an axis of the Vector to control the Track’s
volume. See the diagram “X-Y Assign and Program
Volume,” below, for more details.
Off means that the X-Y position will not affect the Track’s
volume.
X-Y Assign and Program Volume
Center Volume [0, 25, 50, 75, 100%]
This sets the volume of Track 1 at the center point. It applies
only when
Equal Amount , above, is set to Off .
The volumes at the extreme ends of the axis are fixed,
depending on the setting of the
X-Y Assign parameter.
For instance, if X-Y Assign is set to –X, the Track will
always be at 100% volume on the left side, and 0% (silent)
on the right side.
This parameter applies only to the Song X-Y Volume
control, and does not change the Program’s individual X-Y
Volume settings.
Track Center Volume, X-Y Assign = –X
Enable Program X-Y Volume [Off, On]
When this is turned On , the Program’s X-Y Volume control
will function as it does in PROGRAM mode, crossfading
between Oscillators 1 and 2. The crossfade will be controlled
by the Program’s X-Y Envelope and is not affected by the
Song’s X-Y Envelope.
When this is turned Off , the Program’s X-Y Volume control
will be disabled.
Tracks 02–16
The parameters for Tracks 2–16 are identical to those for
Track 01, as described above.
v 1–5: Page Menu Commands
• Compare → p.112
• Memory Status → p.521
• Exclusive Solo → p.113
• Rename Song → p.521
• Initialize Song → p.522
• Copy From Song → p.522
• Load Template Song → p.522
• Save Template Song → p.523
• FF/REW Speed → p.523
• Set Location (for Locate Key) → p.523
• GM Initialize → p.523
• Copy from Combi → p.525
• Copy From Program → p.525
• PAGE → p.126
• MODE → p.126
+127 –127 0
+X
0% 100%
+127 –127 0
–X
100% 0%
Program volume increases
from left to right. Program volume increases
from right to left.
+127
–127
0
+Y
0%
100%
+127
–127
0
–Y
100%
0%
Program volume increases
from bottom to top. Program volume increases
from top to bottom.
Volume
50%
100%
0%
X-Y X-axis position
-127 0 +127
Center Volume Values: 100
75
50
25
0