11.6.23.4 Error 22-4 (emergency code 7305h)
Cause: Channel 1 Initialization, EndDat 2.1: error, no EnDat 2.1 encoder (May be,
it's an SSI encoder!?)
Suggested steps:
No further information available. Please contact your service provider.
Initialization encoder
channel 1
l
Error during the initialization routines of
encoder channel 1.
l
In any case look at init outputs in the message
window of the DriveManager.
l
The most common cause of error is the wiring
to the encoder.
11.6.23.5 Error 22-5 (emergency code 7305h)
Cause: Channel 1 Initialization, EndDat 2.1: error, 'Lines' read from encoder
Suggested steps:
Please note additional Information in the message window of the DriveManager.
Initialization encoder
channel 1
l
Error during the initialization routines of
encoder channel 1.
l
In any case look at init outputs in the message
window of the DriveManager.
l
The most common cause of error is the wiring
to the encoder.
ID No.: 0842.26B.5-01 Date: 09.2020
ServoOne - Device Help
394
11 Alarms & warnings
11.6.23.6 Error 22-6 (emergency code 7305h)
Cause: Channel 1 Initialization, EndDat 2.1: error, 'MultiTurn' read from encoder
Suggested steps:
Please note additional Information in the message window of the DriveManager.
Initialization encoder
channel 1
l
Error during the initialization routines of
encoder channel 1.
l
In any case look at init outputs in the message
window of the DriveManager.
l
The most common cause of error is the wiring
to the encoder.
11.6.23.7 Error 22-7 (emergency code 7305h)
Cause: Channel 1 Initialization, EndDat 2.1: error, 'SingleTurn' read from encoder
Suggested steps:
Please note additional Information in the message window of the DriveManager.
Initialization encoder
channel 1
l
Error during the initialization routines of
encoder channel 1.
l
In any case look at init outputs in the message
window of the DriveManager.
l
The most common cause of error is the wiring
to the encoder.