−
90
−
9. COMPLEMENTARY EXPLANATION OF FUNCTION NOS. (LK-1930)
(1) Fixed retracted position setting (Function No. 003)
Regardless of the 2nd origin in the sewing pattern, a 2nd origin (fixed retracted position) common to each
sewing pattern can be set with the memory switch.
When the item 2 “Fixed retracted position setting” of the function No. 003 of the memory switch is set to
“ON”, the newly set fixed retracted position will become effective, and even if any sewing pattern is read in,
the feeding frame waits at the same position.
Setting of the fixed retracted position
Write in the memory the contents of the change.
Pressing the
and
keys, turn ON the power switch.
Perform the same operation as when starting the level 2 of the memory
switch to indicate Function No. 92.
The panel indication will be as follows :
→
Press
or
key to specify the coordinate X.
→
Press
or
key to specify the coordinate Y.
092. FIXED POS
X 0
Y 0
Lateral retracted position (x 0.1 mm)
Longitudinal retracted position(x 0.1 mm)
Refer to P57.
Refer to P58.
Needle position
(+)
(–)
(–)
(+)
(Caution) 1. The coordinate X, when the needle position is on the right side of the origin, is (+),
and, on the left side of it, (–).
2. The coordinate Y, when the needle position is in the rear of the origin, is (+), and , in
front of it, (–).
