Intermec Trakker Antares 2460, Руководство пользователя

Страница: 87 / 291

nugget
39
Operating the Terminal in a Network
4-29
4
The 246X stationary terminals use these protocols:
Layer Protocol Description
Physical Ethernet card
Serial port
Provides Ethernet communications.
Provides RS-232 serial communications.
Data Link Ethernet protocol
driver Provides Ethernet media access control. The default hardwired
media access control (MAC) protocol used with TCP/IP
supports the Ethernet II standard.
Serial port driver Provides RS-232 (COM1) or RS-232/422/485 (COM2) serial
communications control that uses CSP and the standard
XMODEM or YMODEM protocol for data transfer.
Network IP, ARP, and ICMP The Internet Protocol (IP) complies with the standard outlined
in RFC 791.
The Address Resolution Protocol (ARP) complies with the
standard outlined in RFC 826.
The Internet Control Message Protocol (ICMP) complies with
the standard outlined in RFC 826.
Transport UDP The User Datagram Protocol (UDP) complies with the
standard outlined in RFC 768.
TCP Transmission Control Protocol (TCP) complies with the
standard outlined in RFC 793.
Session and Presentation UDP Plus UDP Plus is an Intermec proprietary session layer protocol
built on UDP. The UDP Plus session layer provides these
services:
• guaranteed delivery
• duplicated message removal
• link connection and status management
• network error recovery
• congestion control
• device error detection
TFTP Trivial File Transfer Protocol (TFTP) allows efficient file
exchange between the terminal and the DCS 300 or host.
TFTP complies with the standard outlined in RFC 1350.
Presentation and Application TMF Terminal Message Format is an Intermec proprietary protocol
that is used to route data, configuration, and network
management messages between applications on the terminal
and peer tasks on the server or host.