Intermec Trakker Antares 2460, Руководство пользователя

Страница: 272 / 291

TRAKKER Antares 246X Stationary Terminal User’s Manual nugget
C-6
Using Display Control Codes (continued)
Command Control Code Description or Action
Save Cursor
Position
ESC[s
Saves the current cursor position. Successive
Save Cursor Position commands overwrite the
previous position that was saved.
Select Character Set
ESC[ n w
Defines the character set to be used where n
identifies the character set. For help, see
“Selecting Character Sets” later in this
appendix.
Setting Preambles and Postambles
With the
EM9560.BIN
application, you can set Preamble A, Preamble B, and Postamble
C on the TRAKKER Antares terminal and make the terminal compatible with the
95XX terminals. The preambles are prepended and the postamble is appended to the
data that is transmitted through all the serial ports.
Preamble A, Preamble B, and Postamble C can each be up to 25 ASCII characters in
length. If you enter a preamble or postamble command without entering data, the
preamble or postamble buffer is cleared.
Syntax: Preamble A AAdata or +.data
Preamble B ABdata or ++data
Postamble C ACdata or +%data
Scan: To set the preamble or postamble using the AA, AB, or AC configuration commands:
1. Scan one of these bar code labels:
Enter Accumulate Mode / Set Preamble A
*+/$+AA*
*+/$+AA*
Enter Accumulate Mode / Set Preamble B
*+/$+AB*
*+/$+AB*
Enter Accumulate Mode / Set Postamble C
*+/$+AC*
*+/$+AC*
2. Scan a value for data from the “Full ASCII Bar Code Chart” in Appendix B. The
preamble or postamble can be from 1 to 25 characters.