Intermec Trakker Antares 2460, Руководство пользователя

Страница: 36 / 291

TRAKKER Antares 246X Stationary Terminal User’s Manual nugget
39
2-8
•
Access the 10-key built-in keypad by pressing the Fn (Function) key followed by
the numeric key.
•
The left and right Alt keys are mapped to Function Left and Function Right
supported by other TRAKKER Antares products.
If you are using the numeric keyboard accessory:
•
Press Num Lock to access the cursor and paging keys.
Connecting to Serial Devices and Networks
You use the terminal’s serial ports to transfer data between the terminal and a serial
device. Every 246X terminal has one serial port (COM1) that supports RS-232
communications. You can use COM1 to connect to a serial device, such as a printer, a
scale, a 9189, or a PC.
The 2460 comes with two serial ports: COM1 and COM2. COM2 supports
RS-232/422/485 communications. You can use COM2 to connect to a serial device, a
wired network, or an Intermec CrossBar network.
To connect the 246X terminal to a serial device or network
1. Insert the 9-pin RS-232 connector into the COM1 port on the back of the terminal.
To serial
device
COM1
COM2
RS-232
connector
246XU.016
2. Insert the 25-pin serial or multi-drop connector from a serial device or network to
the COM2 port on the back of the terminal. For help connecting to a CrossBar
network, see the next section, “Connecting to an Intermec CrossBar Network.”
3. Use a small straight-slot screwdriver to tighten the two screws in the each
connector.
4. Attach the other end of the RS-232 cable to the serial device or network.