Intermec Trakker Antares 2460, Руководство пользователя

Страница: 17 / 291

nugget
d 39
Before You Begin
xvii
Conventions for Bar Codes
You can scan the bar codes listed in this manual to enter data or perform a command.
The bar code labels in this manual are printed in the Code 39 symbology. Each bar code
includes the name and human-readable interpretation. For example:
*$+*
Change Configuration
*$+*
Name
Bar code (Code 39)
Human-readable
interpretation
The asterisks (*) at the beginning and end of the human-readable interpretation are the
start and stop codes for a Code 39 bar code label. If you are using a bar code printing
utility, it may automatically supply the asterisks as the start and stop code, so that you
only need to type the actual text of the command. You can also create and print
configuration labels and reader command labels in Code 93, which has its own start and
stop codes.
Conventions for Commands
This manual includes sample commands that are shown exactly as you should type
them on your terminal or network device. The manual also describes the syntax for
many commands, defining each parameter in the command. This example illustrates the
format conventions used for commands:
To send a configuration command from the DCS 300 server, use this syntax:
$+ command [ command ]...[ command n ]
where:
$+ is the Change Configuration command.
command is a configuration command. For example, BV is the command to set the
Beep Volume on the terminal. Enter the command BV0 to turn off the
beep volume.
You can include multiple configuration command parameters in the command to
configure the terminal.