Intermec Trakker Antares 2460, Руководство пользователя

Страница: 176 / 291

TRAKKER Antares 246X Stationary Terminal User’s Manual Nugg
C d 39
8-28
Command Processing (continued)
Or: To disable or enable the ability to scan multiple-read labels, scan one of these bar
codes:
Disable Multiple-Read Labels Enable Multiple-Read Labels
*$+DC 0* *$+DC 1*
*$+DC 0* *$+DC 1*
Configuration Commands Via Serial Port
Purpose: Allows you to control the data the terminal receives through the serial port. You can set
this command to execute reader and configuration commands received through the
serial port, or treat all data as data without checking for special command syntax. There
are three options:
Disabled
All data received through the serial port is treated as data. The terminal will
not execute reader or configuration commands sent or encoded in the data.
Enabled with TMF
If the data is sent with the TMF (Terminal Message Format)
header, the terminal will check for and execute the TMF command received through the
serial port. With TMF, you can execute reader and configuration commands, or send
and receive data about the current terminal configuration.
Enabled without TMF
The terminal will check for and execute all reader and
configuration commands (i.e., Receive File reader command or Beep Volume change
configuration command).
Note: Before you can enable Configuration Commands Via Serial Port with or without
TMF, you must configure the EOM command.
Syntax: YTn.data
where n is:
1 COM1 port
2 COM2 port
Acceptable values for data are:
0 Disabled
1 Enabled with TMF
2 Enabled without TMF
Default: Enabled without TMF