Intermec Trakker Antares 2460, Руководство пользователя

Страница: 196 / 291

TRAKKER Antares 246X Stationary Terminal User’s Manual Nugg
C d 39
8-48
ISBT Code 128 (continued)
Digit Values Description
Digits 5-6: See List* Right Data ID to be matched for restricted
concatenation. See the list for digits 3 and 4 for valid
combinations.
Digits 7-9: 000-999 Bar code concatenation control parameters.
If digit 10 (see below) is “d,” digits 7 and 8 refer to the
nominal distance in millimeters between the stop
characters of two labels subject to concatenation, and
digit 9 is the label positioning tolerance. If the distance
between the two labels is outside this limit (assuming
standard ISBT bar code print size), the labels will not
be concatenated.
If digit 10 is “t,” digits 7, 8, and 9 are the decode time
limit in milliseconds. If both labels are not decoded in
the same beam sweep within this time, concatenation is
not performed. This time parameter is only accurate to
a 25-millisecond resolution.
Digit 10: d or t See the description for the previous three digits.
Note: The Left Data ID and Right Data ID are used only with the restricted
concatenation option. For example, the terminal will concatenate only those bar code
labels with data identifiers that match the configured data identifiers. The spacing
between bar codes that can be concatenated must be between two and five character
widths.
Default: Digit 1: Symbology ID disabled
Digit 2: Concatenation disabled
Scan: This bar code to enable ISBT Code 128 with the default settings:
Enable ISBT Code 128
*$+CH8*
*$+CH8*