Intermec Trakker Antares 2460, Руководство пользователя

Страница: 213 / 291

Nugg
C d 39
Configuration Command Reference
8-65
8
Example: You want to set a postamble that includes quotation marks. Enter the postamble by
scanning this full ASCII bar code label:
Set Postamble to “B”
*/D/KAE/B/B/BB/B/B/B*
*$+AE"""B"""*
You must enclose the data within quotation marks and precede each quotation mark
with another quotation mark so that the quotation marks are not treated as the end of the
data.
Preamble
Purpose: Sets the preamble that precedes any data you scan with the terminal. Common
preambles include a data location number or an operator number.
Syntax: ADdata
Acceptable values for data are up to 25 ASCII characters. When you enter the AD
command without data, the preamble is disabled. If you are entering quotation marks as
data or grouping configuration commands, you need to enclose the data within
quotation marks (see the example).
Note: To scan a bar code label that includes quotes, you must configure the terminal to
use Code 39 in Full ASCII mode. For help, see “Code 39” earlier in this chapter.
Default: No characters (disabled)
Scan: To disable the preamble, scan this bar code:
Disable Preamble
*$+AD*
*$+AD*
Or: To set the preamble to an ASCII character string:
1. Scan this bar code:
Enter Accumulate Mode / Set Preamble
*+/$+AD*
*+/$+AD*
2. Scan a value for data from the “Full ASCII Bar Code Chart” in Appendix B. The
preamble can be from 1 to 25 characters.