Intermec Trakker Antares 2460, Руководство пользователя

Страница: 205 / 291

Nugg
C d 39
Configuration Command Reference
8-57
8
Or: To set the multi-drop address:
1. Scan this bar code:
Enter Accumulate Mode / Set Multi-Drop Address
*+/$+YN2.*
*+/$+YN2.*
2. Scan a value for data from the “Full ASCII Bar Code Chart” in Appendix B. The
address is a single alphanumeric character from A through Z or 0 to 5.
3. Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
Network Activate
Purpose: Enables or disables network communications between the 2461 terminal and other
devices in the Ethernet network. When you enable this parameter, the terminal attempts
to establish communications with the DCS 300 server or host computer. When you
disable this parameter, the network is disabled.
Note: You must enable the Network Activate parameter to use the 2461 for data
collection in your Ethernet network.
Syntax: NAdata
Acceptable values for data are:
0 Disabled
1 Ethernet network (enabled)
Default: Disabled
Scan: One of these bar codes:
Disable Network Activate
*$+NA0*
*$+NA0*
Enable Ethernet Network
*$+NA1*
*$+NA1*