Intermec Trakker Antares 2460, Руководство пользователя

Страница: 69 / 291

nugget
39
Operating the Terminal in a Network
4-11
4
Example with TMF
In the host application, you want to set the value for two configuration commands on
the terminal. Send this transaction from the host application:
CS$+1
Note: SOM and EOM are not shown in this example.
where:
CS is a TMF Configuration Set request.
$+ is the Change Configuration reader command.
BV4 sets the Beep Volume configuration command to a value of 4, which is a very
loud beep volume.
KA1 enables the Keypad Caps Lock configuration command.
.+1 is the reader command that saves configuration changes to the terminal’s
flash memory.
The terminal returns this transaction to the host application.
Cs$+1
where:
Cs is a TMF Configuration Set response.
$+
is the Change Configuration reader command.
BV4 means the Beep Volume configuration command was changed to a value of 4,
which is a very loud beep volume.
KA1 means the Keypad Caps Lock configuration command was enabled.
.+1 means the configuration changes were saved in flash memory.