Intermec Trakker Antares 2460, Руководство пользователя

Страница: 50 / 291

TRAKKER Antares 246X Stationary Terminal User’s Manual nugget
39
3-4
Choosing the Symbologies the Terminal Decodes
This list contains all the bar code symbologies the terminal can decode:
•
Codabar
•
Code 49
•
Code 11
•
Code 93
•
Code 128
•
Interleaved 2 of 5 (I 2 of 5)
•
Code 16K
•
MSI
•
Code 2 of 5
•
Plessey
•
Code 39
•
UPC/EAN
When the terminal ships, only these three symbologies are enabled:
•
Code 39
•
Code 128
•
UPC/EAN
If you are using one of the other symbologies to encode your bar code labels, you need
to configure the terminal and enable the symbology. To quickly enable symbologies,
see “Scanning Bar Codes to Enable Symbologies” later in this chapter.
To ensure that the terminal can operate quickly and efficiently, you should enable only
the bar code symbologies that you are going to scan. When you enable each bar code
symbology, you may need to set a check digit, the length of the bar code label, or other
options. For help, see the bar code symbology in Chapter 8, “Configuration Command
Reference.”
Specifying How the Terminal Will Communicate
The 246X terminals use serial communications to send data to and from another serial
device. With the Ethernet option, the 2461 can communicate to a host or device on an
Ethernet network.
To learn how to configure the terminal to fit into your wired or Ethernet network, see
Chapter 4, “Operating the Terminal in a Network.”