Intermec Trakker Antares 2460, Руководство пользователя

Страница: 147 / 291

nugget
39
Reader Command Reference
7-27
7
Transmit File Via Network Communications
Purpose: Transmits a file from the 2461 terminal and saves it on the DCS 300 or host.
From Network:
%%R,
drive:fromfilename,tofilename
where:
%%R is the command to transmit a file over the Ethernet network from the
2461 terminal to the DCS 300 or host.
drive: indicates the drive where the file is stored on the 2461 terminal. You
must include the colon (:) after the drive letter.
fromfilename is the name of the file you are transmitting from the 2461 terminal to
the DCS 300 or host.
tofilename is the name of the file that will be saved on the DCS 300 or host. On
the DCS 300, the file is saved on the
D:\USERDATA
directory. To
transmit a file to the host, you need to identify the path and filename
where you want to save the file.
Note: Do not specify the pathname
D:\USERDATA
in the tofilename
field.
Keypad: Not supported
Note: To scan these bar code labels, you must configure the terminal to use Code 39 in
Full ASCII mode. For help, see “Code 39” in Chapter 8.
Scan: 1. Scan this bar code label:
Enter Accumulate Mode / Transmit File
*/K/O/E/ER/L*
*+/%%R,*
2. Scan the bar code label(s) for the file you want to transmit. You can scan labels
from the “Full ASCII Bar Code Chart” in Appendix B. The label must use this
format:
drive:fromfilename,tofilename
3. Scan this bar code label to exit Accumulate mode and transmit the file.
Exit Accumulate Mode
*-/*
*-/*