Getting Started
DS2 Docking Station
62
INDUSTRIAL SCIENTIFIC
Version 9.1 (P/N: 17112798)
Step Instruction
4.
Apply the current addressing to
your PC as Static addressing.
Navigate to Control Panel
(Start / Settings / Control
Panel)
Open Network and Dial-
Up Connections.
Right click on your
adapter and choose
properties as seen at the
right.
Figure 3-22. Selecting Adapter Properties
Highlight ‘Internet
Protocol (TCP/IP)’ and
click on properties as seen
at the right.
Figure 3-23. Choosing TCP/IP Protocol
Change selection from
‘Obtain an IP address
automatically’ to ‘Use the
following IP address’ as
seen at the right.
Type in the 3 addresses
previously copied from
the Command Prompt.
Figure 3-24. The IP Address Group Box
NOTE: A Network Administrator must be Informed about this change.
NOTE: This change can be reversed.
