Industrial Scientific DS2 Docking Station, Руководство администратора

Страница: 147 / 280

DS2 Docking Station

Configuring Instruments
Version 9.1 (P/N: 17112798)
INDUSTRIAL SCIENTIFIC
201
5.12.3. Removing Calibration Data
You can remove calibration data from the system by using the Calibration tab in the instrument
properties or in the properties of an individual sensor.
To remove calibration data from the instrument, follow the instructions listed below.
Step Instruction
1. Open the DSSAC application.
2. Click on the Instruments option in the navigation pane. The contents pane displays a
list of instruments.
3. Double-click on the instrument that contains calibration results you wish to remove.
Alternative: You can also right-click on the instrument and select Properties from
the context menu.
Alternative: You can also select the instrument, and click the File menu and select
Properties.
4. Click on the Calibrations tab.
5. Do one of the following to locate the calibration results:

Click the Show Last button to display the results of the last calibration.

Select a Start Date and an End Date, and then click the Display button to
show calibration results for a specific date range.
6. The calibration results appear in the list.
7. Select the calibration result you wish to remove. You can select multiple calibration
results by pressing the CTRL key on your keyboard while clicking on each entry.
8. Right click on the calibration result(s) and select Remove.
9. The system displays a confirmation prompt. Click Yes to remove the calibration
entries.
10. Click OK to close the Edit Instrument dialog box.
To remove calibration data from a specific sensor, follow the instructions listed below.
Step Instruction
1. Open the DSSAC application.
2. Click on the Instruments option in the navigation pane. The contents pane displays a
list of instruments.
3. Double-click on the instrument that contains calibration results you wish to remove.
Alternative: You can also right-click on the instrument and select Properties from
the context menu.
Alternative: You can also select the instrument, and click the File menu and select
Properties.
4. Click on the Components tab.