Getting Started
DS2 Docking Station
60
INDUSTRIAL SCIENTIFIC
Version 9.1 (P/N: 17112798)
Step Instruction
1.
Choose START / PROGRAMS / INDUSTRIAL SCIENTIFIC / DS2
CONFIGURATOR. The Docking Station Configurator screen is displayed.
To tell the DS2 IDS what the IP address of the server is, select the Server IP Address
tab, and then type in:
the IP address of the DS2
the IP address of the server
and choose Send.
Figure 3-43. Docking Station Configurator Screen
2.
At this point, the DS2 IDS will automatically reboot.
3.11. Assigning a Static IP Address to a Sever or PC
Before assigning static IP addresses to the server or PC, consult with your Information
Technology (IT) Department. If the server or PC on which the DSS software was installed
already has a static IP address, then this section is not necessary. If the computer or server
does
not
have a static IP address, then one must be assigned to it. This can be accomplished by using
the following procedure.
Step Instruction
1.
Any DS2 system should have a static IP address applied to the PC by a qualified IT
person. Be sure to consult qualified personnel before proceeding.
2.
Note that the following steps are used for reference only. They explain how to assign a
static IP address to either a server or PC. Your actual process and data may vary.
