DS2 Docking Station
Configuring
Instruments
Version 9.1 (P/N: 17112798)
INDUSTRIAL SCIENTIFIC
177
Step Instruction
left and a tree-like structure on the right. You can find any setting under the category
All or in a specific category, such as Basic or Survey. A checkmark is displayed next
to any setting that is enabled.
5.
To change a setting, click in the checkbox next to a setting or edit the appropriate
fields. For check boxes, clicking in the checkbox toggles whether or not it is
enabled/disabled. You can also select all settings in a category by clicking in the
checkbox next to the category name. For example, to select all Survey options, click
in the box next to Survey. You can then de-select individual options in the category,
if desired.
6.
Click OK to save your changes. Otherwise, click Cancel to close the Edit Instrument
dialog box without saving your changes.
NOTE:
The Options tab is only available for Docking Station compatible instruments.
Figure 5-6. The Options Tab of the Edit Instrument Dialog Box
Key fields on this screen are shown in the table that follows.
NOTE:
The settings update occurs after the instrument is docked. If you change settings while
an instrument is docked, you must undock and then re-dock the instrument for the changes to
take effect.
Table 5-3. Components of the Options Tab
Component Description
