Honda NSS250A Reflex 2001-2007, Руководство пользователя

Страница: 19 / 718

GENERAL INFORMATION
1-15
DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
FINAL REDUCTION
ALTERNATOR/STARTER CLUTCH
CRANKCASE/CRANKSHAFT/BALANCER
FRONT WHEEL/SUSPENSION/STEERING
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Clutch outer nut 1 12 74 (7.5, 55)
Screw holder socket bolt
(NSS250A)
6 6 10 (1.0, 7)
Stopper arm socket bolt (NSS250A) 6 6 10 (1.0, 7)
Stopper plate socket bolt
(NSS250A)
1 6 10 (1.0, 7)
Drive face bolt 1 10 83 (8.5, 61) Apply oil to the threads and
seating surface, UBS bolt.
Driven pulley nut 1 30 79 (8.1, 58)
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Final reduction case bolt 7 8 24 (2.4, 18)
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Flywheel bolt 1 10 103 (10.5, 76) Apply oil to the threads and
seating surface, UBS bolt.
Starter clutch outer socket bolt 6 6 23 (2.3, 17) Apply locking agent to the
threads.
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Right/Left crankcase socket bolt 2 8 23 (2.3, 17) Apply locking agent to the
threads.
Cam chain tensioner bolt 1 6 12 (1.2, 9)
Bearing cap nut 2 8 33 (3.4, 24) Apply oil to the threads and
seating surface.
Center stand hook bolt 1 6 12 (1.2, 9) Apply locking agent to the
threads.
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Front axle holder bolt 2 8 22 (2.2, 16) ALOC bolt; replace with a
new one.
Steering stem adjusting nut 1 26 – See page 15-29
Steering stem lock nut 1 26 74 (7.5, 55)
Handlebar upper holder socket bolt 4 8 27 (2.8, 20)
Handlebar lower holder nut 2 10 39 (4.0, 29) U-nut
Front axle bolt 1 14 69 (7.0, 51)
Handlebar post mounting bolt 2 12 128 (13.1, 94) ALOC bolt; replace with a
new one.
Fork cap bolt 2 30 22 (2.2, 16)
Fork socket bolt 2 10 29.4 (3.0, 22) Apply locking agent to the
threads.
Fork mounting bolt 4 10 69 (7.0, 51)
Front brake disc socket bolt 4 8 42 (4.3, 31) ALOC bolt; replace with a
new one.
maxiscooter-club.ru