Honda NSS250A Reflex 2001-2007, Руководство пользователя

Страница: 421 / 718

FRONT WHEEL/SUSPENSION/STEERING
15-3
SERVICE INFORMATION
GENERAL
• This section covers the front wheel, fork, handlebar and steering stem.
• When servicing the front wheel, fork or steering stem, support the scooter using a jack or other support is required.
• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated disc
with a high quality brake degreasing agent.
• After installing the front wheel, check the brake operation by applying the brake lever.
• Use only tires marked "TUBELESS" and tubeless valves on rim marked "TUBELESS TIRE APPLICATION".
• When using the pin spanner, use a deflecting beam type torque wrench 25 cm (10 in) long. The pin spanner increases
the torque wrench‘s leverage, so the torque wrench reading will be less than the torque actually applied to the steering
stem adjusting nut. The specification given is the actual torque applied to the adjusting nut, not the reading on the
torque wrench. Do not overtighten the adjusting nut. The specification later in the text gives both actual and indicated
torque.
• For brake system information (page 17-4)
• For handlebar switch inspection:
– NSS250S: (page 22-27)
– NSS250A: (page 22-29)
• For ABS service (page 18-4)
SPECIFICATIONS
Unit: mm (in)
TORQUE VALUES
Frequent inhalation of brake pad dust, regardless of material composition, could be hazardous to your health.
• Avoid breathing dust particles.
• Never use an air hose or brush to clean brake assemblies. Use and OSHA-approved vacuum cleaner.
ITEM STANDARD SERVICE LIMIT
Minimum tire tread depth – 1.5 (0.06)
Cold tire
pressure Driver only 175 kPa (1.75 kgf/cm
2
, 25 psi) –
Driver and passenger 175 kPa (1.75 kgf/cm
2
, 25 psi) –
Axle runout – 0.2 (0.01)
Wheel
Rim runout
Radial – 2.0 (0.08)
Axial – 2.0 (0.08)
Balance weight –
70 g (2.5 oz)
maximum
Fork Spring free length 325.3 (12.8) 315.5 (12.4)
Tube runout – 0.2 (0.01)
Recommended fork fluid
Honda Ultra Cushion Oil 10 W or
equivalent
–
Fluid level 90 (3.5) –
Fluid capacity
204
±
2.5 cm
3
(6.9
±
0.08 US oz, 7.2
±
0.09 Imp oz)
–
Front axle holder bolt 22 N·m (2.2 kgf·m, 16 lbf·ft) ALOC bolt; replace with a new one.
Steering stem adjusting nut – See page 15-29
Steering stem lock nut 74 N·m (7.5 kgf·m, 55 lbf·ft)
Handlebar upper holder socket bolt 27 N·m (2.8 kgf·m, 20 lbf·ft)
Handlebar lower holder nut 39 N·m (4.0 kgf·m, 29 lbf·ft) U-nut
Front axle bolt 69 N·m (7.0 kgf·m, 51 lbf·ft)
Handlebar post mounting bolt 128 N·m (13.1 kgf·m, 94 lbf·ft) ALOC bolt; replace with a new one.
Fork cap bolt 22 N·m (2.2 kgf·m, 16 lbf·ft)
Fork socket bolt 29.4 N·m (3.0 kgf·m, 22 lbf·ft) Apply locking agent to the threads.
Fork mounting bolt 69 N·m (7.0 kgf·m, 51 lbf·ft)
Front brake disc socket bolt 42 N·m (4.3 kgf·m, 31 lbf·ft) ALOC bolt; replace with a new one.
Master cylinder holder bolt 12 N·m (1.2 kgf·m, 9 lbf·ft)
Rearview mirror adaptor bolt 26 N·m (2.7 kgf·m, 19 lbf·ft)
Rearview mirror lock nut 26 N·m (2.7 kgf·m, 19 lbf·ft) Left-hand threads
Front brake caliper mounting bolt 30 N·m (3.1 kgf·m, 22 lbf·ft) ALOC bolt; replace with a new one.
maxiscooter-club.ru