Honda NSS250A Reflex 2001-2007, Руководство пользователя

Страница: 283 / 718

ENGINE REMOVAL/INSTALLATION
8-3
SERVICE INFORMATION
GENERAL
• Support the engine using a jack or other adjustable support to ease of engine mounting bolt removal.
• When removing/installing the engine, tape the frame around the engine beforehand for frame protection.
• The following components can be serviced with the engine installed in the frame.
– Oil pump (page 5-9)
– Throttle body (page 6-82)
– Water pump (page 7-11)
– Camshaft (page 9-8)
– Cylinder head (page 9-11)
– Cylinder/Piston (page 10-4)
– NSS250S: Drive pulley (page 11-11)
– NSS250A: Drive pulley (page 11-18)
– Final reduction (page 12-6)
– Alternator (page 13-7)
– Starter clutch (page 13-9)
• The following components require engine removal for service.
– Crankcase/Crankshaft/Balancer (page 14-5)
SPECIFICATION
TORQUE VALUES
ITEM SPECIFICATIONS
Engine dry weight 48.3 kg (106.5 lbs)
Engine oil capacity After draining 1.3 liter (1.4 US qt, 1.1 Imp qt)
After oil filter change 1.4 liter (1.5 US qt, 1.2 Imp qt)
After disassembly 1.7 liter (1.8 US qt, 1.5 Imp qt)
Coolant capacity Radiator and engine 1.5 liter (1.6 US qt, 1.3 Imp qt)
Reserve tank 0.25 liter (0.26 US qt, 0.22 Imp qt)
Engine hanger nut 59 N·m (6.0 kgf·m, 44 lbf·ft) U-nut
Engine hanger bracket nut 59 N·m (6.0 kgf·m, 44 lbf·ft) U-nut
Tension rod nut 20 N·m (2.0 kgf·m, 15 lbf·ft) U-nut
Shock absorber mounting bolt 39 N·m (4.0 kgf·m, 29 lbf·ft)
Rear brake caliper mounting bolt 30 N·m (3.1 kgf·m, 22 lbf·ft) ALOC bolt; replace with a new one.
maxiscooter-club.ru