Honda NSS250A Reflex 2001-2007, Руководство пользователя

Страница: 453 / 718

REAR WHEEL/PARKING BRAKE/SUSPENSION
16-3
SERVICE INFORMATION
GENERAL
• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated disc
with a high quality brake degreasing agent.
• A contaminated brake drum or shoe reduces stopping power. Discard contaminated shoes and clean a contaminated
drum with a high quality brake degreasing agent.
• When servicing the rear wheel and suspension, support the scooter securely on its center stand.
• After rear wheel installation, check the brake operation by applying the brake lever.
• Use only tires marked “TUBELESS” and tubeless valve stems on rims marked "TUBELESS TIRE APPLICATION".
• Use genuine Honda replacement bolts and nuts for all suspension pivot and mounting point.
• NSS250A: After installing the rear wheel, measure the clearance (air gap) between the sensor and pulser ring (page 18-
26).
• For ABS system service (page 18-4)
• For brake system information (page 17-4)
SPECIFICATIONS
Unit: mm (in)
TORQUE VALUES
TOOLS
Frequent inhalation of brake shoe dust, regardless of material composition could be hazardous to your health.
• Avoid breathing dust particles.
• Never use an air hose or brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner.
ITEM STANDARD SERVICE LIMIT
Minimum tire tread depth – 2.0 (0.08)
Cold tire
pressure Driver only 200 kPa (2.00 kgf/cm
2
, 29 psi) –
Driver and passenger 225 kPa (2.25 kgf/cm
2
, 33 psi) –
Wheel
Rim runout
Radial – 2.0 (0.08)
Axial – 2.0 (0.08)
Balance weight –
70 g (2.5 oz)
maximum
Parking brake Drum I.D. 95.0 – 95.2 (3.74 – 3.75) 95.5 (3.76)
Lining thickness 2.8 – 3.0 (0.11 – 0.12) 2.0 (0.08)
Rear brake disc socket bolt 42 N·m (4.3 kgf·m, 31 lbf·ft) ALOC bolt; replace with a new one
Swingarm mounting bolt 49 N·m (5.0 kgf·m, 36 lbf·ft)
Rear axle nut 118 N·m (12.0 kgf·m, 87 lbf·ft) U-nut
Shock absorber mounting bolt 39 N·m (4.0 kgf·m, 29 lbf·ft)
Rear brake caliper mounting bolt 30 N·m (3.1 kgf·m, 22 lbf·ft) ALOC bolt; replace with a new one
Parking brake arm bolt 10 N·m (1.0 kgf·m, 7 lbf·ft)
Air cleaner housing mounting bolt 11 N·m (1.1 kgf·m, 8 lbf·ft)
Shock absorber bracket mounting bolt 30 N·m (3.1 kgf·m, 22 lbf·ft)
Driver
07749-0010000 Attachment, 42 x 47 mm
07746-0010300 Pilot, 17 mm
07746-0040400
maxiscooter-club.ru