Hitachi WJ200-001L, Инструкция по эксплуатации, Страница: 484 / 680

Ver.2

55
“A” Function
Run
Mode
Edit
Defaults
Func.
Code
Name Description A B Initial data Units

Curvature of EL-S-curve at
the end of deceleration Range is 0 to 50%
 
10. %

Deceleration hold frequency Sets the frequency to hold deceleration,
range is 0.0 to 400.0Hz


0.00
Hz

Deceleration hold time Sets the duration of deceleration hold,
range is 0.0 to 60.0 seconds.


0.0
s

PID sleep function action
threshold Sets the threshold for the action, set
range 0.0 to 400.0 Hz


0.00 Hz

PID sleep function action
delay time Sets the delay time for the action, set
range 0.0 to 25.5 seconds.


0.0 s

[VR] input active range start
frequency The output frequency corresponding to
the analog input range starting point,
range is 0.0 to 400.0 Hz
  0.00 Hz

[VR] input active range end
frequency The output frequency corresponding to
the current input range ending point,
range is 0.0 to 400.0 Hz
  0.00 Hz

[VR] input active range
start % The starting point (offset) for the current
input range,
range is 0. to 100.%
  0. %

[VR] input active range
end % The ending point (offset) for the current
input range,
range is 0. to 100.%


100. %

[VR] input start frequency
select Two options; select codes:

 Use offset (

value)

 Use 0Hz


01

