Hitachi WJ200-001L, Инструкция по эксплуатации

Страница: 477 / 680

Ver.2

48
Drive Parameter Setting Tables
Introduction
This appendix lists the user-programmable parameters for the WJ200 for version2 series inverters and
the default values for European and U.S. product types. The right-most column of the tables is blank, so
you can record values you have changed from the default. This involves just a few parameters for most
applications. This appendix presents the parameters in a format oriented toward the keypad on the
inverter.
Parameter Settings for Keypad Entry
WJ200 for version2 series inverters provide many functions and parameters that can be configured by
the user. We recommend that you record all parameters that have been edited, in order to help in
troubleshooting or recovery from a loss of parameter data.
Main Profile Parameters
NOTE:. Mark “

” in A line of [ Run Mode Edit] shows the accessible parameters when b031 is not set “10”,
high level access.
NOTE:. Mark “

” in B line of [ Run Mode Edit] shows the accessible parameters when b031 is set “10”,
high level access.
“F” Function
Run
Mode
Edit
Defaults
Func.
Code
Name Description A B Initial data Units

Output frequency setting Standard default target
frequency that determines
constant motor speed, range is
0.0 / start frequency to
maximum frequency (A004)
  0.0 Hz

Acceleration time (1) Standard default acceleration,
range is 0.01 to 3600 seconds.
  10.0 s

Acceleration time (1),
2
nd motor
  10.0 s

Deceleration time (1) Standard default deceleration,
range is 0.01 to 3600 seconds.
  10.0 s

Deceleration time (1),
2
nd
motor
  10.0 s

Keypad RUN key routing Two options; select codes:

 Forward

 Reverse
  00 
Inverter model
WJ200
MFG. No.
This information is printed
on the specification label
located on the right side of
the inverter