manualshive.com logo in svg

Hitachi FSXN Series, Руководство по обслуживанию

Поделиться
Скачать
Hitachi FSXN Series Скачать руководство пользователя страница 255

(6) Check method by checking mode

To Start Checking

Press PSW1 for once.

(A) Outdoor Combination Unit No.

Unit

Indication

PrT0
PrT2
PrT3

Unit A (No.1)
Unit B (No.2)
Unit C (No.3)

Menu

Connecting Information

Outdoor Unit Information

Indoor Unit Information

Cause of Alarm Code

History of Alarm Code

The Details of indicated informations
shall be according to the (B) 
“Connecting Information”.

The Details of indicated informations
shall be according to the (C) 
“Outdoor Unit Information”.

The Details of indicated informations
shall be according to the (D) 
“Indoor Unit Information”.

The Details of indicated informations
shall be according to the (E) 
“Cause of Alarm Code Information”.

The Details of indicated informations
shall be according to the (F) 
“Alarm Code History Information”.

Check Mode

“CHEC”

External 

Input/Output

“ioST”

Function

Setting

“FUNC”

The outdoor combination unit No. is
indicated on the 7-segment display as follows.

Indication Example
Unit A (No.1)

Details of External 
Input/Output Setting is shown
in item 4.2. 

And Function Setting is shown
in item 4.3.

Press PSW1 more than 
3 seconds. 
“Menu” will be indicated. 

PSW1

PSW2

PSW3

PSW5

PSW4

PSW pushswitch on PCB1

PSW1: enter.

PSW2, 3, 4 and 5: for checking.

•

To cancel the check method.

Press PSW1 for more than three seconds while the “menu mode” is displayed.

The indication on the LCD screen will be turned OFF and condition will return to normal.

  N O T E

Ensure the check mode is cancelled after the checks have been carried out.

(B) Connection information

This information is indicated on unit A (main unit) only.

Press PSW4 (▼) to move forward or PSW2 (▲) to move back.

Select the outdoor unit No. for indication.

Press PSW3 (►) for detailed information on the selected unit No.:

Unit

Indication

Unit A (No. 1)

od00

Unit B (No. 2)

od02

Unit C (No. 3)

od03

Press PSW4 (▼) to move forward or PSW2 (▲) go back.

This information will be alternatively indicated as “Item” 

→

 “Details”.

8 Troubleshooting

249

SMGB0065 rev. 1 - 12/2010

8

Содержание FSXN Series
















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды