Hioki Power HiTester 3193, Инструкция по эксплуатации

Страница: 158 / 310

140
────────────────────────────────────────────────────
*TRG
────────────────────────────────────────────────────
Syntax
*
TRG
Syntax
*
TST?
Response
syntax
(Header ON/OFF)
<NR1>
<NR1> = 0 to 31
Example
Transmission
Response
*TST?
20
(Input unit error + printer error)
Syntax
*
WAI
Example
:VOLT1:RANG 150;:RESP
SLOW;*WAI;:MEAS? U1,I1
After operation for voltage range and
response, the :MEAS? command is
executed.
Function
･
Same operation as the :HOLD command.
･ If the system is currently in the hold
state, performs sampling once.
Function
Causes the 3193 to perform the self test,
and returns the result thereof as a
numerical data value in NR1 format (0 to
31).
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
Printer
error
RTC
error
Input unit
error
RAM
error ROM
error
･ Input unit error:
no sensor of the clamp unit, no unit for
channel 1
･
RTC error:
internal clock abnormal
･
Printer error:
no printer paper, head-up, temperature
out of range
Note
･
No header is affixed to the response
message.
Function
When a sequence of commands is written
in a single line, the process waits until all
commands before the *WAI command
have completed before continuing with
the following commands.
*
TRG
Request for sampling
*
TST?
Requests execution of, and queries the result of, the self test.
*
WAI
Waits until sampling is fully completed.