Hioki Power HiTester 3193, Инструкция по эксплуатации

Страница: 145 / 310

127
────────────────────────────────────────────────────
12.3 Interface Outline
────────────────────────────────────────────────────
Event status register 2 (ESR2)
Bit 7
Unused
Bit 6
O6
9605 channel 6 out of range
Indicates summary of ESR26, which shows the out-of-range
input for the 9605 channel 6
Bit 5
O5
9605 channel 5 out of range
Indicates summary of ESR25, which shows the out-of-range
input for the 9605 channel 5
Bit 4
O4
9605 channel 4 out of range
Indicates summary of ESR24, which shows the out-of-range
input for the 9605 channel 4
Bit 3
O3
9605 channel 3 out of range
Indicates summary of ESR23, which shows the out-of-range
input for the 9605 channel 3
Bit 2
O2
9605 channel 2 out of range
Indicates summary of ESR22, which shows the out-of-range
input for the 9605 channel 2
Bit 1
O1
9605 channel 1 out of range
Indicates summary of ESR21, which shows the out-of-range
input for the 9605 channel 1
Bit 0
Unused
(6) Event status registers 2 (ESR2)
This register monitors for out-of-range inputs to the 9605 harmonic
analysis/flicker measurement unit. Its value is therefore all zeros unless the
optional 9605 is installed.
Bits 1 to 6 correspond to the harmonic analysis boards for channels 1 to 6.
However, since a maximum of three harmonic analysis boards can be
selected simultaneously, no more than three bits can ever be set.
The bits are summaries of the event status registers 21 to 26 (ESR21 to
ESR26), which show the out-of-range information for each input unit.
The following commands are used for reading the event status register 0, and
for setting the event status enable register 2 and for reading it.
Reading event status register 2 *ESR2?
Setting event status enable register 2 *ESE2
Reading event status enable reister 2 *ESE2?