Hioki Power HiTester 3193, Инструкция по эксплуатации

Страница: 173 / 310

155
────────────────────────────────────────────────────
:DATAout:ITEM:SUM
────────────────────────────────────────────────────
Syntax
:DATAout:ITEM:SUM
<NR1,..
(7 items)>
<NR1> = 0 - 63
Example
:DATAOUT:ITEM:SUM 7,7,7,0,0,0,0
As the default output items to the
floppy disk drive or printer for SUM
value, specify U12, U34, U56, I12,
I34, I56, P112, P34, P56.
Syntax
:DATAout:ITEM:SUM?
Response
syntax
:DATAOUT:ITEM:SUM
<0-63>
Example
Transmission
Response
:DATAOUT:ITEM:SUM?
:DATAOUT:ITEM:SUM 7,7,7,0,0,0,0
Syntax
:DATAout:FD
<ON/OFF>
Example
:DATAOUT:FD ON
Set the data output on a floppy disk to
on.
Function
Sets the output items (7 items) for SUM
value.
The items are set as shown below by
setting bits, to specify seven numerical
values.
bit
7
bit
6
bit
5
bit
4
bit
3
bit
2
bit
1
bit
0
1 － － U45 U456 U123 U56 U34 U12
2 － － I45 I456 I123 I56 I34 I12
3 － － P45 P456 P123 P56 P34 P12
4 － － S45 S456 S123 S56 S34 S12
5 － － Q45 Q456 Q123 Q56 Q34 Q12
6 － － PF45 PF456 PF123 PF56 PF34 PF12
7 － － DEG45 DEG456 DEG123 DEG56 DEG34 DEG12
Error
Execution error / If the setting data is out
of the range.
Note
Depending on the optional unit installing,
if the set items which cannot be selected
is ignored.
Function
Queries the output items (7 items) for
SUM value.
Function
Enables or disables outputting on a
floppy disk.
Not set to
ON even when sending the
[ON] command with the HIOKI 3193-10.
:DATAout:ITEM:SUM
Sets the output item for SUM value.
:DATAout:ITEM:SUM?
Queries the output item for the SUM value.
:DATAout:FD
Sets the output operation on a FDD.