Hioki Power HiTester 3193, Инструкция по эксплуатации

Страница: 120 / 310

102
────────────────────────────────────────────────────
11.8 Saving the Data on FDD
────────────────────────────────────────────────────
11.8.1 Automatic Saving Using Time Settings
Timer
START
/STOP
Auto stop
:Save
Interval
START
/STOP
START
/STOP
Waiting
START
/STOP
Auto stop
stop time
Real time control
Auto start
start time
Timer
Interval
START
/STOP
Auto stop
Waiting
Interval
START
/STOP
Auto stop
stop time
Auto start
start time
Real time control
NOTE
11.8 Saving the Data on FDD
Automatic saving is achieved by combination with the interval, timer, or
real-time control time settings.
Setting Method
1. Set the the item to be saved and file name.
2. Set the time on the "time control" screen from the STATUS screen, and
then return to the MEAS screen.
For details, see Section 4.9.
3. Press the START/STOP key to start auto-saving by time set.
4. To stop saving, press the
START/STOP
key again.
･
The data values for a single set of timing operations are saved to the same
file name.
･
During operations by time controls, it is not possible to change the settings.
For the items which is set to auto-range, the range is fixed when the
START/STOP key is pressed.
･ If the settings are different from those at the start time, setting data is also
saved for each interval or at the stop time.
･
If the timer end timing does not coincide with the interval timer timing, then
the unit stops with the timer end timing, and the last interval timing is
ignored.
･
If the real-time control end timing does not coincide with the interval timer
timing, then the unit stops with the real-time control end timing, and the last
interval timing is ignored.
･
If the floppy disk becomes full during automatic saving, the saving operation
is discontinued. In this case, insert a new, formatted, floppy disk. The
automatic saving then continues, using the same file name.