Hioki Power HiTester 3193, Инструкция по эксплуатации

Страница: 121 / 310

103
────────────────────────────────────────────────────
11.8 Saving the Data on FDD
────────────────────────────────────────────────────
11.8.2 Manual Saving
NOTE
11.8.3 Screen Hard Copy
1110-1.tif CHANGE
F1 F2 F3 F4 F5
SAVE COLOR
FREQ/OUTPUT
Saving time Saving capacity
Colors Approx. 5 min Approx. 300 KB
Gray Approx. 3 min Approx. 165 KB
Monochrome Approx. 1 min Approx. 40 KB
11.8.4 Saving the Settings
NOTE
Pressing the SAVE/PRINT key can save the measurement data which is
selected in Section 11.7.
During automatic output, the SAVE/PRINT key is invalid.
The screen display can be saved in bmp file.
For settings of file name, see Section 11.6, "Setting File Names for Saved
Measurement Data".
1. Select STATUS screen to display
FREQ/OUTPUT
page.
2. Using the
CURSOR
keys, move the cursor to
"Saving screen color".
F1
(
Colors
): Save, including the screen colors.
F2
(
Gray
): Save as a gray-level screen.
F3
(
Monochrome
): Save as a black-and-white
screen.
3. Select the display to be saved and press COPY key.
The time and data capacity to save depends on the setting conditions.
It is not possible to save automatically corresponding to the time settings.
Pressing the
COPY
key after pressing the
SHIFT
key can save the settings for
the unit.
For items to be saved, see Section 13.7.4, "Help Printing Mode."
During automatic output to printer or FDD, this key is invalid.