Hioki Power HiTester 3193, Инструкция по эксплуатации

Страница: 155 / 310

137
────────────────────────────────────────────────────
*IDN?
────────────────────────────────────────────────────
Syntax
*IDN?
Response
syntax
(Header: ON/OFF)
<
First><Second><Third><Fourth>
First field Manufacturer's name
Second field Model name
Third field Serial No.
Fourth field Software version
Example
Transmission
Response
*IDN?
HIOKI,3193,0,V1.00
Syntax
*OPC
Example
AAA;BBB;CCC;*OPC;DDD
After the execution of the
"AAA;BBB;CCC" is completed, the bit
is ON.
Syntax
*OPC?
Response
syntax
After operations are completed,
"1"
Function
･
Queries device ID (manufacturer's name,
model name, serial No, software version.
Notes
･ The *IDN? query is the last query
message in the program messages.
Accordingly, if another query is detected
after this query, a query error is
generated, and no response message after
the *IDN? query is produced.
･ No header is affixed to the response
message.
･
If any error occurs, no response message
to this query is produced.
Error
Query error / If the response message is
longer than 2000 bytes
Function
･
When a sequence of commands is written
in a single line, the *OPC command sets
LSB (OPC bit) of SESR when the
process of all commands before the
*OPC command have completed.
･
When this command is received, the
measurement data is updated.
Function
･
The same as the
*
OPC command, except
in that, at the instant that the previous
commands have been completed, instead
of bit 0 (the OPC bit) of the standard
event status register (SESR) being set to
1, the response message "1" is returned.
･
When this command is received, the
measurement data is updated.
Notes
･
With this query, if any error occurs, no
response message is produced.
･
No header is affixed to the response
message.
*IDN?
Queries device ID.
*OPC
After all action has been completed during execution, performs an SRQ request.
*OPC?
Queries whether or not all action has been completed during execution.