Hioki Power HiTester 3193, Инструкция по эксплуатации

Страница: 194 / 310

176
────────────────────────────────────────────────────
:MEASure:ITEM:NORMal
────────────────────────────────────────────────────
Syntax
:MEASure:ITEM:NORMal
<NR1,
(8 items)>
<NR1> = 0 - 63
Example
:MEASURE:ITEM:NORMAL 7,7,7,0,0,
0,0,0
Sets the U1, U2, U3, I1, I2, I3, P1, P2,
P3 as default items to response to the
:MEASure? query.
Syntax
:MEASure:ITEM:NORMal?
Response
syntax
:MEASURE:ITEM:NORMAL
<NR1>
Example
Transmission
Response
:MEASURE:ITEM:NORMAL?
:MEASURE:ITEM:NORMAL 7,7,7,0,0,
0,0,0
Function
Sets the default items (only measurement
value for each channels) to be transferred
in the response message to the
:MEASure? query in the default mode.
The items are set as shown below by
setting bits, to specify eight numerical
values.
bit
7
bit
6
bit
5
bit
4
bit
3
bit
2
bit
1
bit
0
1 － － U6 U5 U4 U3 U2 U1
2 － － I6 I5 I4 I3 I2 I1
3 － － P6 P5 P4 P3 P2 P1
4 － － S6 S5 S4 S3 S2 S1
5 － － Q6 Q5 Q4 Q3 Q2 Q1
6 － － PF6 PF5 PF4 PF3 PF2 PF1
7 － － DEG6 DEG5 DEG4 DEG3 DEG2 DEG1
8 － － PK6 PK5 PK4 PK3 PK2 PK1
Error
Execution error / If the setting data is out
of the range.
Note
The items P, S, Q, PF, DEG cannot be
selected in connection mode 3P3W or
3V3A.
Depending on the optional unit installing,
if the set items which cannot be selected
is ignored.
Function
Queries the default items to be
transferred, which are specified by the
measurement value for each channels.
:MEASure:ITEM:NORMal
Sets the output item for the normal measurement.
:MEASure:ITEM:NORMal?
Queries the output item for the normal measurement.