manualshive.com logo in svg

Hioki BT5525, Инструкция по эксплуатации, Страница: 62 / 215

Поделиться
Скачать
Hioki BT5525 Скачать руководство пользователя страница 62

62

Detecting Micro Insulation Failure (BDD Function)

Enabling the BDD stop function

When the BDD stop function is enabled, the instrument will automatically stop testing when the 
BDD count reaches or exceeds 1. Since the output voltage will also be stopped, this function helps 

ensure testing safety.

Measurement-4

Charge period

Steady period

Discharging

Test start

Discharge start

Discharge complete

Test end

Test voltage

Resistance 

measurement

BDD

EXT. I/O BDD

(Output)

Previous result

Cleared at start of test

Output ON 

when the BDD count is 1 or more

CCV

CVV and CVI

ON

OFF

Measurement 

delay

Measurement-1

N PLC M PLC

DELAY

MEAS

SPEED

BDD

Measurement-1

Saved to 

memory

Saved to 

memory

Saved to 

memory

Saved to 

memory

Measurement-2 Measurement-3 Measurement-4

Measurement-2 Measurement-3

BDD
Saved to memory

 •

When testing starts, resistance measurement starts in accordance with the sampling time setting 
(1 PLC to 100 PLCs).

 •

When one measurement completes, the measured value is saved to memory.

 •

BDD events are detected in accordance with either the CCV settings (during the charging period) 
or the CVV and CVI settings (during the steady-state period).

 •

If the BDD count reaches or exceeds 1, the output voltage will stop, and the instrument will enter 
the discharge state. In addition, the EXT. I/O BDD output will turn on.

 •

In the above example, four measured values have been saved to memory, and one BDD 
measured value has been saved to BDD memory, since the BDD stop function activated to end 
testing during the fifth measurement.

HIOKI BT5525A961-00

Содержание BT5525
























































































































































































































Отзывы:

Нет отзывов