Hioki BT5525 Скачать руководство пользователя страница 26

Страница: 26 / 215

Inspecting the Instrument before Test

2.1 Inspecting the Instrument before Test

DANGER

Before use, verify that test lead insulation is not torn and that no metal

is exposed.

Before use, inspect the instrument and verify that it’ s operating

properly.

Using test leads or an instrument that is damaged could result in serious bodily injury.

If you discover any damage, replace with a Hioki-specified part.

Inspecting accessories and options

Check item

Action

The coating of the power cord is not

ripped.

No metal parts of the power cord are

exposed.

If there is any damage

Do not use the power cord as the damaged cord can cause

electric shock or short circuit accidents. Please contact your

authorized Hioki distributor or reseller.

The coating of the test leads is not

ripped.

No metal parts of the test leads are

exposed.

If there is any damage

Replace with those specified by our company as the damaged

test leads can cause electric shock accidents.

The resistance value is normal after

checking the insulation resistance test.

If the resistance value is not normal

There may be a short circuit between the conductors inside the

test lead. Replace with those specified by our company as the

damaged test leads can cause false judgment.

Inspecting the instrument

Check item

Action

The instrument is not damaged.

If there is any damage

Request repair.

Checking the insulation resistance test

Perform the following inspection before starting a test to use this instrument safely.

Check item

Action

The measured resistance value matches

the resistance value of the prepared

resistor.

See “Checking the insulation resistance test” (p. 27).

HIOKI BT5525A961-00

Содержание BT5525
























































































































































































































Результаты поиска

Содержание BT5525

Отзывы:

Hioki BT5525, Инструкция по эксплуатации, Страница: 26 / 215

Результаты поиска

Содержание BT5525

Отзывы: