Hioki BT5525 Скачать руководство пользователя страница 31

Страница: 31 / 215

Connecting the Test Leads to the Device Under Test (DUT)

2.5 Connecting the Test Leads to the Device Under

Test (DUT)

DANGER

Do not short wires carrying a voltage with the tips of the test leads.

Doing so could cause a short-circuit, resulting in serious bodily injury.

CAUTION

Adequately discharge the residual electric charge of the DUT before connecting

the test leads.

Connecting the test leads to the charged DUT can damage the instrument.

Check the residual electric charge of the DUT.

Fully discharge any residual electric charge, if any, and then connect the test leads to the DUT.

Connect the test leads to the DUT.

Red

Black

Start the test.

See “4.1 Starting a Test” (p. 49).

In order to perform a test safely, inspect the instrument prior to the test.

See “2.1 Inspecting the Instrument before Test” (p. 26).

Test Preparation

HIOKI BT5525A961-00

Содержание BT5525
























































































































































































































Результаты поиска

Содержание BT5525

Отзывы:

Hioki BT5525, Инструкция по эксплуатации, Страница: 31 / 215

Результаты поиска

Содержание BT5525

Отзывы: