Hioki BT5525 Скачать руководство пользователя страница 30

Страница: 30 / 215

Connecting the Test Leads

2.3 Connecting the Test Leads

Connect the optional test leads to the measurement terminals.

See “Options” (p. 9)

WARNING

Disconnect power to the circuit to which the DUT is connected before

connecting the test leads to the terminals.

Failure to do so could damage the instrument or result in bodily injury.

When using this instrument, use only Hioki specified test leads.

Using a test lead other than the specified parts could result in bodily injury or a short-

circuit.

CAUTION

When disconnecting the test lead of the LOW terminal, disengage the lock and

then pull out the BNC connector while gripping it at the connection (do not pull

on the cable).

Failure to observe this instruction may damage the BNC connector or joints.

Black

Red

Low

High

Connect the red cable to the HIGH terminal and the

black cable to the LOW terminal.

Special triaxial connector

2.4 Connecting a Communications Cable

The instrument can be controlled using the RS-232C interface, LAN interface, or USB interface.
Connect the appropriate communications cable to the RS-232C connector to use the RS-232C

interface, to the LAN connector to use the LAN interface, and to the USB connector to use the USB
interface.

See “8.2 RS-232C Interface” (p. 101), “8.3 LAN Interface” (p. 1 03), and “8.4 USB Interface” (p. 1 10).

HIOKI BT5525A961-00

Содержание BT5525
























































































































































































































Результаты поиска

Содержание BT5525

Отзывы:

Hioki BT5525, Инструкция по эксплуатации, Страница: 30 / 215

Результаты поиска

Содержание BT5525

Отзывы: