Hioki BT5525 Скачать руководство пользователя страница 16

Страница: 16 / 215

Precautions for Use

Handling the test leads

DANGER

Do not use test leads whose insulation is damaged or whose metal

portion is exposed.

Doing so could cause serious bodily injury.

WARNING

When using the instrument while connected to test leads, use the lower

of the ratings indicated on the instrument and on the test leads.

Using the instrument to make measurements that exceed either rating could cause

the operator to experience an electric shock.

When using this instrument, use only Hioki specified test leads.

Using a test lead other than the specified parts could result in bodily injury or a short-

circuit.

CAUTION

Do not step on cords or allow them to become caught between other objects.

Doing so may damage insulation, resulting in an electric shock.

Do not bend or pull on cables at temperatures of 0

C or lower.

The cable is hardened. Doing so could damage the insulation or cause a wire break,

resulting in an electric shock.

Do not bend, pull on, or twist cables, including where they connect, with

excessive force.

Doing so could cause a wire break.

HIOKI BT5525A961-00

Содержание BT5525
























































































































































































































Результаты поиска

Содержание BT5525

Отзывы:

Hioki BT5525, Инструкция по эксплуатации, Страница: 16 / 215

Результаты поиска

Содержание BT5525

Отзывы: