Chapter III Operation Instructions of Drive
32
Chapter III Operation Instructions of Drive
3.1 Key function description
The key functions of HAV-SP-LKD and HAV-SP-LCD are defined in Table 3-1.
Table 3-1 Keypad Function Table
Key
Name
Label in the
manual
Function description
PRG
Program/Exi
t key
PRG
Enter or exit programming state
RUN
Run key
RUN
In the keypad mode, press this key to run
the drive.
Stop key
STOP
When the drive is in the normal running
state, if the drive's running instruction
channel is set to the keypad stop effective
mode, press this key and the drive will stop
according to the set mode. When the drive
is in the fault state, press this key to reset
the drive and return to the normal stop state.
Increment
key
▲
Increase data or function code
Decrement
key
▼
Decrease data or function code
Shift key
In the edit state, you can select the
modification bit of the set data
ENTER
Rotary
encoder
When pressed down, it is the ENT key, you
can enter the drop-down menu or confirm
data.
When the input frequency channel is set to
keypad, the rotary encoder can modify the
set frequency of the drive.
ENT
Enter key
ENT
Enter menu or data confirmation
SHT
SHT
SHT
Shift between digits
3.2 Keypad operation methods
You can perform various operations on the drive by operating the keypad, as follows:
3.2.1 Shortcut monitoring parameter view
6 shortcut parameters are fixedly displayed in the shortcut monitoring interface, which can be
switched by the Up or Down key. When the ENT key is pressed down in this interface, it will
immediately return to the first shortcut parameter, and the 6 shortcut parameter sequence list is as
follows.